Start on the hallway and some Zigbee

November passed by quickly towards the end of the month I got back to renovating. It was time for the hallway. I pulled some last pipes to the studio where I can later on put data cable through and then we started by putting the ceiling plates in. Since the hallway only needs 3 of those large plates I didn’t rent the lift, but without it, it sure was more effort. Good thing Hendrik showed up at the right time to lend a helping hand.

The next days I finished the walls, what a different view!

In between I also received a CC2531 Zigbee USB Dongle. Since Ikea uses Zigbee for it’s home automation hardware, this would be a better solution to connect the Ikea stuff to my home assistant. The setup was pretty straight forward. Ik updated the firmware of the stick, installed zigbee2mqtt in my home assistant and started discovering the lamps, switches and other tradfri items. I soon got a nice graphical overview of the mesh network formed by the zigbee units. I created an automation for the lamp in the living room to turn on before sunset and turn off at 23:00. Getting the dimming function working will take some more effort, but that will come later. It is nice to see how home assistant lets an Ikea tradfri switch turn on the WLED installation in the bathroom.

If you have found a spelling error, please, notify us by selecting that text and pressing Ctrl+Enter.

Spelling error report

The following text will be sent to our editors: